Defining the basics of storm water
Storm water can be defined as the water that results from precipitation, which includes rainwater, subsoil water or spring water.
Storm water can be captured by separate storm sewers, sewage or drainage facilities, or conveyed by snow removal equipment.
According to the U.S. EPA, “when storm water is absorbed into soil, it is filtered and ultimately replenishes aquifers or flows into streams and rivers.”
When storm water overflows into storm drains, sewer systems and drainage ditches, there are significant impacts detrimental to the environment according to the EPA, including:
Storm water runoff can contain pollutants including nitrogen and phosphorus. The EPA cites urban and suburban areas as producing more storm water runoff because these areas have larger quantities of paved and hard surfaces.
According to the Wisconsin Department of Natural Resources, there are many types of pollutants in storm water runoff, including: garbage, oil and grease, gasoline, sediment, road salt, heavy metals and more.
According to the Minnesota Stormwater Manual, rainwater is different from storm water. Rainwater is storm water runoff collected directly from roof surfaces. Rainwater typically has lower levels of pollutants so it requires less treatment.
According to the U.S. EPA, when storm water flows over hard surfaces directly into storm drains, there is an inability to filter out pollutants.
However, there are storm water and rainwater harvest and use systems.
A storm water harvesting and use system captures and retains storm water for beneficial use and potentially has four components including: a collection system; a storage unit treatment system; pre- and post-treatment if necessary; and the distribution system.
According to the Water Environment Federation (WEF), in combined sewer systems, storm water flows with wastewater and is treated at a water resource recovery facility.
EPA states that “a combined sewer system collects rainwater runoff, domestic sewage, and industrial wastewater into one pipe.”
EPA's Combined Sewer Overflow (CSO) Control Policy offers guidance on how communities with CSOs can achieve Clean Water Act (CWA) compliance through the NPDES permitting program.
According to EPA, nonpoint source pollution is reported as the leading remaining cause of water quality problems by states.
This pollution is the result of runoff, drainage, precipitation and more, and is specifically caused by rainfall or snow melt moving, picking up and carrying away pollutants.
The pollution is then deposited into lakes, rivers, wetlands, coastal waters and ground waters, impacting drinking water supplies, recreation, and more.
The EPA has compiled lists of storm water best practice and maintenance manuals here and has a Storm Water Management Model (SWMM).
The Storm Water Solutions staff invites industry professionals to nominate the water and wastewater projects they deem most remarkable and innovative for recognition in the Annual Reference Guide issue. All projects must have been in the design or construction phase over the last 18 months.
French Drains and Their Downfall
Darker Water at Panama City Beach Caused by Tannins
GIS Takes a Lead Role in Watershed Management
Connecticut Storms Multiply, Extreme Flooding Anticipated for Summer
©2022 Scranton Gillette Communications. All Rights Reserved Sitemap | Privacy Policy | Terms & Conditions